Discussion:
[OpenIndiana-discuss] Hardware to run OpenIndiana ...
Jürgen Bereuter
2018-04-22 14:34:06 UTC
Permalink
Hello,
i try to install Hipster 2017.10 (usb) on an HP Proliant Microserver Gen 10.
I know, that i had to disable uefi boot and use legacy bios, that works, so i am able to install it. And i have to disable acpi support (for installation and booting/running openindiana afterwards). But with this disabled option i am not able to reboot from command line (it freezes).

Till, you wrote, that you have installed Openindiana on such a system. Is there a trick to solve my problems?
Thanks! jürgen
Till Wegmüller
2018-04-22 16:58:59 UTC
Permalink
Hi Jürgen.

I must admit I really seldomly reboot that system appart from the fma
errorlog it just runs.

Usually I use "init 5" to shutdown as this gets the best results.
Init 6 should help.

I have Set "acpi-user-options=2" in /boot/conf.d/acpi maybe that helps.
My guess is that acpi is Re-enabled during boot and thus the freeze.

Hope this helps
Till
Post by Jürgen Bereuter
Hello,
i try to install Hipster 2017.10 (usb) on an HP Proliant Microserver Gen 10.
I know, that i had to disable uefi boot and use legacy bios, that works, so i am able to install it. And i have to disable acpi support (for installation and booting/running openindiana afterwards). But with this disabled option i am not able to reboot from command line (it freezes).
Till, you wrote, that you have installed Openindiana on such a system. Is there a trick to solve my problems?
Thanks! jürgen
_______________________________________________
openindiana-discuss mailing list
https://openindiana.org/mailman/listinfo/openindiana-discuss
Jürgen Bereuter
2018-04-22 19:47:40 UTC
Permalink
Till,
that was very helpful! The system is working and i am able to reboot (thats important, although i think, it could be a reboot after a kernel panic), and, also important to know, that these errors do not affect system integrity.

Thanks you for your fast response.
jürgen
Post by Till Wegmüller
Hi Jürgen.
I must admit I really seldomly reboot that system appart from the fma
errorlog it just runs.
Usually I use "init 5" to shutdown as this gets the best results.
Init 6 should help.
I have Set "acpi-user-options=2" in /boot/conf.d/acpi maybe that helps.
My guess is that acpi is Re-enabled during boot and thus the freeze.
Hope this helps
Till
Post by Jürgen Bereuter
Hello,
i try to install Hipster 2017.10 (usb) on an HP Proliant Microserver Gen 10.
I know, that i had to disable uefi boot and use legacy bios, that works, so i am able to install it. And i have to disable acpi support (for installation and booting/running openindiana afterwards). But with this disabled option i am not able to reboot from command line (it freezes).
Till, you wrote, that you have installed Openindiana on such a system. Is there a trick to solve my problems?
Thanks! jürgen
_______________________________________________
openindiana-discuss mailing list
https://openindiana.org/mailman/listinfo/openindiana-discuss
_______________________________________________
openindiana-discuss mailing list
https://openindiana.org/mailman/listinfo/openindiana-discuss
Till Wegmüller
2018-04-22 20:29:11 UTC
Permalink
Glad I could help.

While not ideal it may also be of use to disable svc:/system/fmd:default
until it gets support for the Hardware sensors it is missing.

I run this server in private home setup so for me it does not matter
that fmd is disabled. If you want to keep fmd enabled the best option
for now is to to write a cronjob that disables it purges the errorlog
and then reneables fmd again. Otherwise the log will eat your disk space.

Have fun with and Greetings
Till
Post by Jürgen Bereuter
Till,
that was very helpful! The system is working and i am able to reboot (thats important, although i think, it could be a reboot after a kernel panic), and, also important to know, that these errors do not affect system integrity.
Thanks you for your fast response.
jürgen
Post by Till Wegmüller
Hi Jürgen.
I must admit I really seldomly reboot that system appart from the fma
errorlog it just runs.
Usually I use "init 5" to shutdown as this gets the best results.
Init 6 should help.
I have Set "acpi-user-options=2" in /boot/conf.d/acpi maybe that helps.
My guess is that acpi is Re-enabled during boot and thus the freeze.
Hope this helps
Till
Post by Jürgen Bereuter
Hello,
i try to install Hipster 2017.10 (usb) on an HP Proliant Microserver Gen 10.
I know, that i had to disable uefi boot and use legacy bios, that works, so i am able to install it. And i have to disable acpi support (for installation and booting/running openindiana afterwards). But with this disabled option i am not able to reboot from command line (it freezes).
Till, you wrote, that you have installed Openindiana on such a system. Is there a trick to solve my problems?
Thanks! jürgen
_______________________________________________
openindiana-discuss mailing list
https://openindiana.org/mailman/listinfo/openindiana-discuss
_______________________________________________
openindiana-discuss mailing list
https://openindiana.org/mailman/listinfo/openindiana-discuss
_______________________________________________
openindiana-discuss mailing list
https://openindiana.org/mailman/listinfo/openindiana-discuss
Loading...